Welch Allyn Micro Tymp 1, Service Manual

Page: 7 / 82

Section 1.5 General Information
MICRO TYMP 1 OPERATING PROGRAM
PUSH BUTTON, MT 1 ACTIVATES
PROPER PRESSURE READING . . .
COMPLIANCE READING AT FULL LEVEL
FAST FLASHING OPEN SYMBOL
CAVITY ON PROBE TIP? (VOLUME CHANGE)
PROPER MAGNITUDE OF CHANGE?
START PRESSURIZATION < . . .
REACH 200 daPa? . . .
PRINT VALID VOLUME? . . .
BEGIN TO PRINT GRAPH
REACH -300 daPa? . . .
OPEN VALVE/RETURN PUMP TO START POSITION
DISPLAY PRESSURE RANGE ERROR
WAITING FOR NEXT CYCLE ('TYMP")
DISPLAY SAVE DATA GRAPH*
COMPLETE ADMITTANCE CURVE?
FAST FLASHING BLOCK SYMBOL
YES
YES
YES
YES
YES
YES
YES
YES
YES
NO
YES
NO
LOW (50-CF) . . . LEAK SYMBOL
LOWER (40-50) . . . SLOW FLASH BLOCK SYMBOL
LOWEST (<40) . . . FAST FLASH BLOCK SYMBOL
NO
NO
NO
NO
NO
NO
TOO SMALL
TOO LARGE
SLOW FLASHING BLOCK SYMBOL
SLOW FLASHING OPEN SYMBOL
LEAK SYMBOL
RETURN PUMP TO START POSITION
NOT ENOUGH
TOO MUCH
*GRAPH DOES NOT HAVE TO HIT THE BASELINE. HOWEVER, IT MUST COMPLETE THE ADMITTANCE CURVE.