Welch Allyn Micro Tymp 1, Service Manual

Page: 13 / 82

Section 2.2 Service
Required Tools and Fixtures for Service
Specialized test equipment and standard tools are required for diagnosis, calibration,
assembly, and board level repairs.
COMMERCIALLY AVAILABLE EQUIPMENT/TOOLS QUANTITY REQUIRED:
BRUEL & KJAER MODEL 2231X SOUND METER
(1)
B&K 1625 1/3 - 1 OCTAVE FILTER SET (1)
B&K ZC0020 INPUT STAGE TO BK2231 (1)
B&K A00027 EXTENSION CABLE (1)
B&K Z19100/WH2014 INTERFACE MOD. 25 PIN (1)
B&K 4144 1" MICROPHONE (1)
B&K POWER SUPPLY FOR ABOVE (1)
B&K DB0375 1" MICROPHONE ADAPTOR (1)
DVOM (BECKMAN310/4410 OR EQUIV.) (1)
OSCILLOSCOPE (STORAGE) (1)
ELECTRONIC SOLDERING STATION (1)
ELECTRONICS AND JEWELERS SCREWDRIVER SET (1)
LEAD STRAIGHTENING PLIERS (UTICA#U508) (1)
SCREWDRIVER (#1 PHILLIPS#2501) (1)
SCREWDRIVER (#2 PHILLIPS#2502) (1)
SCREWDRIVER (7/32"Flat Blade,PH#143-36) (1)
WIRE CUTTER (Xcelite 107CG) (1)
WIRE STRIPPER (Xcelite 105SCG) (1)
LONG NOSE PLIERS (XCELITE 51CG) (1)
HEMOSTATS (2)
GROUND MAT (1)
GROUNDING STRAP FOR TECHNICIAN (1)
TWEEZERS (STRAIGHT) (1)
SMALL DRILL BIT SET (1)
COTTON TIPPED SWABS (LINT FREE) (1)
WELCH ALLYN CUSTOM TOOLS AND MATERIALS:QUANTITY REQUIRED:
T-3281 TYMP CALIBRATOR
(1)
(includes dual power supply and leads)
T-5657 PRESSURE APPLICATOR BOX
(1)
T-5609 TYMP HOLDING FIXTURE (1)
T-5744 FIXED CAVITY 5 piece set (1)
includes:.2 cc, .5 cc, 1 cc, 2 cc, 3 cc
T-3382 HA-1 ADAPTOR BRASS
(1)
T-5734 DIAPHRAGM PLACEMENT TOOL (TUCKER) (1)
M-31446 ROSIN CORE SOLDER(.020")63SN/37PB (1)
M-30313 G.E.RTV108 CLEAR Thick (1)
M-30327 G.E.RTV118 CLEAR Surface Leveling (1)
M-13069 RED GLYPTOL VARNISH (1)
M-30342 LOCKTITE ACCELERATOR (1)
M-30341 LOCKTITE BLACK MAX ADHESIVE (1)
* CAUTION WHEN USING ADHESIVES
pg 10
*
*