Weissgauff MCP-3050, Instructions Manual

Page: 29 / 64

29
LIST OF POSSIBLE PROBLEMS:
PROBLEM POSSIBLE CAUSE SOLUTION
The cover will not close. - The removable seal ring of the
cover is installed incorrectly.
- The inner bar of the steam
release valve prevents closing of
the cover.
- Check correctness of the seal
ring installation.
- Slightly turn the cover and try
once more. If required - remove
the inner cover of the valve (17)
and press on the inner part of the
valve fl oat.
The cover will not open. - The pressure is not released.
- The inner bar of the steam re-
lease valve does not lower after
pressure release.
- Release the pressure with the
help of the steam release valve (6).
- Unplug the appliance. Let it
cool. Place the upper part of the
steam release valve (6) into the
position of the pressure release.
Make sure there is not steam
coming out. Then press the valve
fl oat (12) with a knife or stem of a
spoon (not to burn).
There is much con-
densate on the cover
or steam is constantly
released.
- The cover (2) is closed incor-
rectly.
- The seal ring (3) is missing or it
is installed incorrectly.
- There are food remnants on
the seal ring.
- The seal ring is worn (3).
- Check if the cover (2) is installed
correctly.
- Install or check correctness of
the seal ring (3) installation.
- Clean the seal ring (3) and inner
cover.
- Have the seal ring (3) replaced
by an authorized centre.
If the appliance operates prop-
erly, there must be no steam
coming from under the cover!
The steam release fl oat
will not rise.
- There are too little ingredients
or liquid in the container.
- The seal ring is damaged or the
appliance is not hermetic.
- Check the recipe and amount of
ingredients.
- Apply to an authorized centre.
There is no indication
when the appliance is
switched on, the heating
element is cold.
- The electric cord is not con-
nected or connected incorrectly.
- The socket is broken.
- Check condition of the electric
cord and its connection.
- Make sure that the socket is
operable.
The appliance is broken. - Apply to an authorized centre.
There is cooking indica-
tion on the display, but
the work section is cold.
- The heating element is broken.
- The connections of the heating
elements are broken.
- The control panel is broken.
- Apply to an authorized centre.
After completion of
cooking, the “Heating”
mode will not switch one
(save for the YOGURT,
FRYING, FRIED POTA-
TOES modes).
The control panel is broken. - Apply to an authorized centre.