上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
16
/
53
8.
Keys for common ports
Used to turn on / off frequently used ports, and execute common operations,
including
Resume
,
Pause
and
Reset
keys.
9.
Switch for machining control
Used to start or stop the movement of the machine tool.
See
Execute Machining
for details.
10.
Feed override knob
Used to adjust feed override from 0 to 120%.
11.
Power Switch
Used to control power on or off.
12.
Handwheel
Used to control the movement of the machine tool by a handwheel.
The operation panel has its own handwheel.
13.
G00 override knob
Used to adjust G00 override from 0 to 100%.
14.
Operation panel switch
Used to enable or disable operation panel.
15.
USB interface
Used to connect with USB flash disks.
16.
E-stop switch
Used to stop the movement of the machine tool when the machine tool is in danger,
so as to protect the operator and machine tool.
After danger is cleared, you can rotate the switch clockwise to remove the E-stop
alarm.