上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
37
/
53
2.
Press
H
.
Browse for Folder
dialog box pops up:
3.
Select
Network
→ target PC, find the desired shared folder, and click
OK
. File
list in the shared folder shows in
Network
interface.
4.
To select the target program file, press
↑
or
↓
.
5.
To load the target program file for machining, press
F1
.
You can also do the following for a shared program file from the internet:
•
F5:
unload the loaded program file.
•
F8:
copy the target program file into
NK300CX
.
3.2
Execute Tool Calibration
This operation is used to measure the selected tool, so as to ensure it works
normally during machining.
Types of tool calibration includes the following:
•
Mobile calibration
•
•
First-time calibration or calibration after tool changed
: default setting
This operation mainly focuses on the last two types of tool calibration.
To set the type of tool calibration, press
→
1
→
F8
, input the manufacturer
password, and modify the value of parameter
Calibration Type
.
