上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
45
/
53
2.
To select the target WCS, press
.
3.
Optional:
To enable edge finder for accurate centering, press
F6
:
–
Enable:
Spindle Speed during Centering
is valid. Proceed to step
4
.
–
Disable:
Spindle Speed during Centering
is invalid. Proceed to step
5
.
Under this condition, the spindle speed is the value set in the software or
program file when
or
is pressed to turn on the spindle.
4.
Optional:
Set spindle speed during centering in
S in Centering
input box.
A large value is not suggested. And it is set to
500 RPM
by default.
5.
Move X-axis to one side of the workpiece, and press
F1
. The system
automatically records the machine coordinate of the current point.
6.
Move X-axis to the other side of the workpiece, and press
F2
. The system
automatically calculates the midpoint coordinate based on the coordinate of the
current point and records in the last step, and sets it as the workpiece origin.
3.5
Select Tools for Machining
This operation is used to select the target tools to machine the target parts of the
workpiece when several tools exist in the program file and each tool is used to
machine different part.
It is only effective to
G code
and
ENG
files.
Before selecting tools for machining, do the following:
1.
Press
→
1
→
F2
, ang check related program parameters.
2.
Optional:
To enable modifying tool number in ENG files, modify the values of
the following parameters to
Yes
:
–
Parameter
N65207 Modify Tool No. in ENG File
–
Parameter
N65208 Auto Modify Tool No.
It is only available to ENG files with 5.50 to 5.53 version.
