上海维宏电子科技股份有限公司
SHANGHAI WEIHONG ELECTRONIC TECHNOLOGY CO., LTD
49
/
53
After setting, you can check the start line and end line of the loaded program file at
the top of each interface and in
Machining
interface under
functional area:
3.7
Execute Machining
This operation is used to run the program form the beginning to the end until the
end of block or any intentional interruption.
In
AUTO
mode, press
.
The system automatically starts machining.
During machining, you can do one of the following to control machining:
•
To stop machining, press
.
•
To pause machining, press
.
