Weidmüller 1334950000, Manual

Page: 27 / 84

5 Detail description of controllers | UC20-WL2000-IOT
27 Manual u-control 2604080000/03/08.2020
5.2 UC20-WL2000-IOT
Up to 64 active u-remote modules can be connected via the
u-remote system bus to the UC20-WL2000-IOT controller.
The controller has two Ethernet connections for integration
into the existing network architecture or HMI connections.
The integrated engineering tool u-create web can be
launched via the USB service interface or over Ethernet. In
u-create web , the u-control station can be configured and
parametrised and control applications can be programmed
(programming language: JavaScript by Node-RED).
The station's main power supply is integrated into the con-
troller. Power is supplied via two 4-pole connectors, separat-
ed into the input and output current paths.
Controller UC20-WL2000-IOT (Order no. 1334990000)
Status indicators
PWR
SF
BF
MT
IOT
1
2
3
4
1
2
3
4
RUN/STOP
L/A X1
L/A X2
3
4
X1
X2
LED Status indicators UC20-WL2000-IOT, for error messages see Chapter 12
PWR Power LED green : supply voltage present, firmware is
running
SF System failure red: serious system failure
BF Bus failure green: communication with modules OK
red: communication error with module or no
modules connected
MT Maintenance green flashing twice: operating system is
running
RUN/
STOP
Controller status off: no application deployed
green : application is deployed and running
L/A X1 Connection/
activity
green : connection of controller connection 1
with an additional field device
green/yellow flashing : data being ex-
changed on connection 1
L/A X2 Connection/
activity
green : connection of controller connection 2
with an additional field device
green/yellow flashing : data being ex-
changed on port 2