IE-SW-VL08M Series User’s Manual
Featured Functions
3-51
tagged and/or untagged devices and/or other
switches/hubs.
ATTENTION
For communication redundancy in the VLAN environment, set “Redundant Port,” “Coupling
Port,” and “Coupling Control Port” as “Trunk Port,” since these ports act as the “backbone” to
transmit all packets of different VLANs to different Ethernet Switches.
Port PVID
Setting
Description
Factory Default
VID range from 1
to 4094
Set the port default VLAN ID for untagged devices that
connect to the port.
1
Fixed VLAN List (Tagged)
Setting
Description
Factory Default
VID range from 1
to 4094
This field will be active only when selecting the “Trunk”
port type. Set the other VLAN ID for tagged devices that
connect to the “Trunk” port. Use commas to separate
different VIDs.
None
Forbidden VLAN List
Setting
Description
Factory Default
VID range from 1
to 4094
This field will be active only when selecting the “Trunk”
port type. Set the VLAN IDs that will not be supported by
this trunk port. Use commas to separate different VIDs.
None
To configure the
Port-based VLAN
, use the VLAN Setting page to configure the ports.
VLAN Mode
Setting
Description
Factory Default
802.1Q VLAN
Set VLAN mode to 802.1Q VLAN
Port-based VLAN Set VLAN mode to Port-based VLAN
802.1Q VLAN
