Weidmüller Switch Configuration Utility
A-7
Import Configuration
The
Import Configuration
function is used to import an entire configuration from a text file to the
Switch. This utility can be used to transfer the configuration from one Switch to another, by first
using the Export Configuration function (described in the previous section) to save a switch
configuration to a file, and then using the Import Configuration function. Do the following to import
a configuration:
1.
Highlight the server (from the Weidmueller Switch list in the Configurator window’s left pane),
and then click the
Import
toolbar icon
, or select
Import Configuration
from the
Configuration
menu.
2.
Click
Open
to navigate to the text file that contains the desired configuration. Once the file is
selected, click
Open
again to initiate the import procedure.
3.
The
Setup Configuration
window will be displayed, with a special note attached at the lower
portion of the window. Parameters that have been changed will be activated with a checkmark.
You may make more changes if necessary, and then click
OK
to accept the changes.
