12. DISPOSAL
Î
Dispose of the WEH
®
Product appropriately when you no longer need it. Observe the
national and local disposal regulations valid at the time of disposal.
13. ACCESSORIES | SPARE PARTS
Screw plug for plug version
If the WEH
®
Connector is used as a plug, port ‘B1’ must be closed by means of a steel
screw plug (O-ring made of NBR 70° shore) for high pressure ranges. The operator must
check that the seal is compatible with the media.
Part No�
Description
Connection
(male thread)
Pressure range
W9329
Screw plug high pressure
G1/8"
50 - 350 bar
W9330
Screw plug high pressure
G1/4"
50 - 350 bar
W9333
Screw plug high pressure
G3/4"
50 - 350 bar
Lever extension
The clamping lever (Pos. 2) is equipped with a short lever as standard. This allows conve-
nient connection to components that are difficult to access. Depending on the application,
the WEH
®
Connector can be equipped with a lever extension for ease of use and when
space is not limited. Please refer to
Chapter 9.4.5 Assembly of the lever extension (Pos. 5)
for body size 1 to 3 on page 33
.
Part No�
Description
E67-137059
Lever extension
Suspension attachment
For applications with balancer, we offer a suspension attachment with adaptor and bore
for body size 4 to 7. The suspension attachment is attached to port ‘B1’.
Part No�
Description
Connection
W115291
Suspension attachment for TW241 (body size 4 to 7)
G3/4" (internal
thread) to G3/4"
(external thread)
MD-10026-L51-R1.0.0-03
Page 39
Operating instructions
AE
