9�4�3
Replacement of front seal (Pos� 7) for body size 4 to 7
Î
Move the
clamping lever (Pos. 2) to the
straight starting position.
Î
Clamp the connector, with
the clamping lever facing
upwards, in a vice with the
appropriate
WEH
®
Clamping jaws.
Î
Unscrew the connector with a
rolling fork wrench.
Î
Remove the pressure spring
from the housing.
Î
Remove the two washers and
the front seal (Pos. 7) from
the housing using the
WEH
®
O-ring picker.
Note:
Hold the housing
straight when removing it so
that the clamping jaws can
not fall out and slip.
MD-10026-L51-R1.0.0-03
Page 29
Operating instructions
AE
