9�4
Maintenance
Please note:
Subsequent mentions of descriptions and position numbers refer to
Chapter 3. Product overview / product description on page 10
Î
If you detect any leaks or malfunction, replace the WEH
®
Product or send it to WEH
for maintenance. Stop using the product immediately.
The following maintenance work may be carried out by the operator:
Î
Check the WEH
®
Product for leak tightness and correct functioning – ease of move-
ment, sufficant lubrication, wear, contamination and damage.
Î
Check the sealing surface of the front seal (Pos. 7). If any tears, cracks or damage
are visible on the front seal, replace it. Please refer to
to
Î
Regularly check the clamping jaws for dirt accumulation and lubrication. Dirt parti
-
cles can interfere with the clamping and sealing function, posing a potential hazard.
If the clamping jaws jam or run sluggishly, lubricate the mating surface. Please refer
Chapter 10. Lubrication on page 36.
Î
Check the clamping lever (Pos. 2) regularly for ease of movement and sufficient
lubrication. If the WEH
®
Product is sluggish, lubricate the connector. Please refer to
Chapter 10. Lubrication on page 36.
MD-10026-L51-R1.0.0-03
Page 24
Operating instructions
AE
