Weco WF-104, Instruction Manual, Page: 59 / 96

WELD THE WORLD
Cod. 006.0001.0940
16/04/2018 V.2.25
WF-104
WF-108
59
ENGLISH
D
Exit without confirmation
○ Press the S4 button.
Return to the job menu.
○ Press the S4 button to exit.
Exit with confirmation
○ Hold down for 3 seconds button S8 .
Return to the job menu.
○ Press button S8 again.
11.3 LOADING A USER JOB
If using a torch with UP/DOWN buttons you can scroll through the uploaded JOBs.
You can quit the uploaded job with the following methods:
• turn encoders
E1
-
E2
to change the welding current or voltage.
• press the welding mode selection button (button S2).
• Press the following button:
If there are no JOBS loaded, the UP/DOWN buttons on the torch serve to adjust the welding current.
This function is available when welding mode is not active.
HOLD
Menu Menu
m/min
mm
S T O P
L1
L2 L3
L4
L5
L6 L7 L8
L9
L10
L11
L12
L13
L14
L15
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
E1 E2
E3
D1 D2
D4
Example of control panel (applies to model WF-108)
ACTIVATION
OUTPUT
OUTPUT
A
D D
D
B
SELECTION
SETTING
C
C
A
○ Hold down button
S8
to activate the job menu.
The job menu appears in display: D4 .
B
○ Press buttons S5 and S6 to select parameter OPT .
The selected parameter is shown by symbol “

”.