Weco WF-104, Instruction Manual, Page: 26 / 96

WELD THE WORLD
C
od
. 006.0001.0940
16/04/2018 V.2.25 WF-104
WF-108
26
ENGLISH
HOLD
Menu Menu
m/min
mm
S T O P
L1
L2 L3
L4
L5
L6 L7 L8
L9
L10
L11
L12
L13
L14
L15
S1
S2
S3 S4
S5
S6
S7
S8
S9
S10
E1 E2
E3
D1 D2
D4
Example of control panel (applies to model WF-108)
A
SELECTION
B
SETTING
SETTING
B
OUTPUT
OUTPUT
C
C
A
○ Press and hold down the button S7 for 5 second.
The SET UP menu will be accessed, with the machine on .
LOCK...WRITE PASSWORD : 0000 -
The message will appear on display:
D4
○ Enter the active 4 digit numerical password.
B
○ Use buttons S5 and S6 to select the digit to be changed.
The selected digit will flash
.
.
○ Use encoder E3 to set up the value.
C
○
Exit without confirmation
- Press the S4 button.
This action will automatically close the menu
○ Exit with confirmation
- Press the S7 button.
The unit restarts with the power-up procedure.
Quit lock status.
6.3 GAS FLOW ADJUSTMENT
When the unit is powered on the solenoid valve opens for 1 second.
This serves to fill the gas circuit.
○ Open the gas solenoid valve by pressing and releasing button S9 .
○ Adjust the pressure of gas flowing from the torch by means of the flow meter connected to the
gas cylinder.
○ Close the gas solenoid valve by pressing and releasing the button S9 .
○ The solenoid valve closes automatically after 30 seconds.