Weco WF-104, Instruction Manual, Page: 40 / 96

WELD THE WORLD
C
od
. 006.0001.0940
16/04/2018 V.2.25 WF-104
WF-108
40
ENGLISH
HIGH SPEED CURVES:
the curves are available in HSL series power sources in the PULSED MIG/
MAG - DOUBLE PULSED MIG/MAG mode.
Pulsed HS is a special function in the pulsed MIG/MAG mode, featuring a very short and intense arc,
EASILY controlled by the welder. HS pulsed, compared to other high deposition welding systems, al -
lows the welder to achieve a comfortable arc without increased stress.
These curves differ from the other standard curves because of the acronym HS which is displayed after
the reference to the welding wire material.
Example:
PULSED MODE SYN
MAT

SG2/SG3 HS
Ø:1.2
GAS: 80% Ar / 20% CO2 R4
JOB : FE55 MARIO K1
HIGH CONTROL CURVES: the curves are available in HSL series power sources in PULSED MIG/
MAG - DOUBLE PULSED MIG/MAG welding mode.
The new HC (High Control) Pulsed curve features a very fast arc control in order to achieve a very fast
drop detachment with a highly reduced energy. The welding benefits are:
- Increased arc stability
- Very reactive arc to the torch movement
- Reduced energy transmitted to the welded workpiece
- Very linear transfer and optimal edge wettability
- Very fast operation
- Spatters and microrojections almost entirely absent.
These curves differ from the other standard curves because of the acronym
HC
which is displayed after
the reference to the welding wire material.
Example:
PULSED MODE SYN
MAT

SG2/SG3 HC
Ø:1.2
GAS: 80% Ar / 20% CO2 R4
JOB : FE55 MARIO K1