Weco WF-104, Instruction Manual, Page: 43 / 96

WELD THE WORLD
Cod. 006.0001.0940
16/04/2018 V.2.25
WF-104
WF-108
43
ENGLISH
Welding
Shows the average current meas -
ured during welding.
Shows the average voltage measured
during welding.
Shows “---“.
HOLD function
(At welding end)
Shows the average current
measured during the last welding
procedure performed.
Shows the average voltage measured
during the last welding procedure per -
formed.
Shows “---“.
10.2.1 Manual MIG/MAG parameters setting (1st level): inductance setting.
B
○ Using the encoder E3 , edit the value of the selected parameter
The value is saved automatically.
IND: This parameter allows electronic adjust -
ment of the welding inductance from the main
menu.
SHORT/SPRAY MAN
IND

100
10.2.2 MANUAL MIG/MAG PARAMETERS SETTING (2ND LEVEL)
C
○ Press the button S7 to enter the 2nd level menu.
D
○ Scroll down the list of parameters to be edited by pressing buttons S5 and S6
B
○ Using the encoder E3 , edit the value of the selected parameter
The value is saved automatically.
Tab. 6 - 2nd level menu parameters in MANUAL MIG/MAG mode
PROCEDURE PARAMETER MIN DEFAULT MAX NOTES
2 STROKE
2 STROKE SPOT
INDUCTANCE (row 1/6) 1 100 200
PRE GAS (row 2/6) 0.0 s 0.0 s 10.0 s
SOFT START (row 3/6) 1 % 35 % 100 %
BURN BACK (row 4/6) 1 % 25 % 200 %
POST GAS (row 5/6) 0.0 s 1.0 s 10.0 s
SPOT TIME (row 6/6) 0.1 s OFF 25.0 s
The parameter value is saved for each
welding mode.
4 STROKE
INDUCTANCE (row 1/5) 1 100 200
PRE GAS (row 2/5) 0.0 s 0.0 s 10.0 s
SOFT START (row 3/5) 1 % 35 % 100 %
BURN BACK (row 4/5) 1 % 25 % 200 %
POST GAS (row 5/5) 0.0 s 1.0 s 10.0 s