Weco WF-104, Instruction Manual, Page: 50 / 96

WELD THE WORLD
C
od
. 006.0001.0940
16/04/2018 V.2.25 WF-104
WF-108
50
ENGLISH
10.4.1 Pulsed Synergic MIG/MAG parameters setting (1st level): synergic curve setting.
B
○ Scroll down the list of parameters to be edited by pressing buttons S5 and S6
C
○ Using the
encoder E3
, edit the value of the selected parameter
The value is saved automatically.
10.4.2 Pulsed Synergic MIG/MAG parameters setting (2nd level).
D
○ Press the button S7 to enter the 2nd level menu.
B
○ Scroll down the list of parameters to be edited by pressing buttons S5 and S6
C
○ Using the
encoder E3
, edit the value of the selected parameter
The value is saved automatically.
Tab. 10 - 2nd level menu parameters in PULSED SYNERGIC MIG/MAG mode
PROCEDURE PARAMETER MIN DEFAULT MAX NOTES
2 STROKE
2 STROKE SPOT
ARC SET (row 1/6) 1 SYN 200
PRE GAS (row 2/6) 0.0 s 0.0 s 10.0 s
SOFT START (row 3/6) 1 % SYN 100 %
BURN BACK (row 4/6) 1 % SYN 200 %
POST GAS (row 5/6) 0.0 s 1.0 s 10.0 s
SPOT TIME (row 6/6) 0.1 s OFF 25.0 s The parameter value is saved
for each welding mode.
4 STROKE
4 STROKE B-LEVEL
ARC SET (row 1/6) 1 SYN 200
PRE GAS (row 2/6) 0.0 s 0.0 s 10.0 s
SOFT START (row 3/6) 1 % SYN 100 %
BURN BACK (row 4/6) 1 % SYN 200 %
POST GAS (row 5/6) 0.0 s 1.0 s 10.0 s
B-LEVEL (row 6/6) 1 % OFF 200 % The parameter value is saved
for each welding mode.
3 LEVEL 2 STROKE
2 STROKE SPOT
ARC SET (row 1/12) 1 SYN 200
PRE GAS (row 2/12) 0.0 s SYN 10.0 s
SOFT START (row 3/12) 1 % SYN 100 %
START 3LEV (row 4/12) 10 % 130 % 200 %
START TIME (row 5/12) 0.0 s 0.5 s 10.0 s
SLOPE 3LEV 1 (row 6/12) 0.1 s 0.5 s 10.0 s
SLOPE 3LEV 2 (row 7/12) 0.1 s 0.5 s 10.0 s
CRATER 3LEV (row 8/12) 10 % 80 % 200 %
CRATER TIME (row 9/12) 0.0 s 0.5 s 10.0 s
BURN BACK (row 10/12) 1 % SYN 200 %
POST GAS (row 11/12) 0.0 s 1.0 s 10.0 s
SPOT TIME (row 12/12) 0.1 s OFF 25.0 s The parameter value is saved
for each welding mode.