Weco WF-104, Instruction Manual, Page: 39 / 96

WELD THE WORLD
Cod. 006.0001.0940
16/04/2018 V.2.25
WF-104
WF-108
39
ENGLISH
9.3 3RD LEVEL
The menu contains the settings and values that are changed infrequently and are to be set up the first
time the unit is powered up.
The changed parameters remain saved until the next modification or reset of the unit.
§ “SET-UP (INITIAL SET-UP OF THE WELDING POWER SOURCE)”.
Set value.
Menu level
Selected parameter.
x = number of the currently dis -
played menu page.
y
= total number of menu pages.
SET UP x / y
COOLING TYPE
ON
10 WELDING SETTINGS
10.1 WELDING CURVES SELECTION
SHORT/SPRAY SYN
MAT  SG2/SG3
Ø:1.2
GAS: 80% Ar / 20% CO2 R4
JOB : FE55 MARIO K1
○ Select parameter MAT by pressing buttons S5 and S6 .
- Using the encoder E3 , edit the value of the selected parameter.
○ Select parameter Ø by pressing buttons S5 and S6 .
- Using the encoder E3 , edit the value of the selected parameter.
○ Select parameter GAS by pressing buttons S5 and S6 .
- Using the
encoder E3
, edit the value of the selected parameter.
10.1.1 Special curves: HIGH SPEED, HIGH CONTROL, POWER FOCUS and POWER
ROOT
No specific procedures are required to activate these curves. The special curves appear in the list to -
gether with the standard curves.