Weco Edge 550, Manual

Page: 57 / 221

Utilization... Application screen icons
Edge 580 - Edge 550
3-56
3.3.5.1 B
EVEL
, M
INI BEVEL
, F
ACETTING
/C
HAMFERING
(
ACCORDING TO MACHINE
)
3.3.5.1.1 T
YPES OF
B
EVELS
, M
INI BEVELS
, F
ACETTINGS
/C
HAMFERINGS
(
ACCORDING TO MACHINE
)
Ecran 3-6 : Bevel sub-finishing Icons
WARNING : T
HE FACETTE
(
CHAMFER
)
CAN BE PERFORMED ONLY WITH
19
MM END FITTINGS
.
> Manual Facetting/Chamfering (according to machine), Manual Bevel or Manual Mini bevel
By selecting this type of finish, you can check and reposition the facette/chamfer (according to ma-
chine), the bevel or the mini bevel during the edging cycle using the special screen which is displayed
after the lens feeling cycle.
>
Percentage Facette/Chamfer (according to machine), Bevel or Mini bevel
The apex of the facette/chamfer (according to machine), bevel or mini bevel is positionned at a per-
centage of the lens thickness from the front face.
Enter the desired percentage using the Parameters button
.
Example : for a bevel situated at 1/3 of the lens thickness from the front face, enter 33%.
>
Front face Facette/Chamfer (according to machine), Bevel or Mini bevel
The facette/chamfer (according to machine), bevel or mini bevel follows the front face of the lens and
is positionned at a given distance in mm between the apex of the bevel and the front face of the lens.
Enter the desired distance using the Parameters button .
Example : apex of bevel situated 2.2 mm from the front face of the lens
Parameters
Manual Percentage
Front face
Automatic
Base +
Min. distance
Front face