Weco Edge 550, Manual

Page: 216 / 221

Edge 580 - Edge 550
8-215
=> Technical Specifications
8.1 CHARACTERISTICS
>
Automatic initialization
> Feeling front & rear lens faces in 3 dimensions
>
Equipement :
Glass roughing wheel (according to machine)
Roughing wheel for all plastics (CR39, high index, polycarbonate)
Bevel/rimless finishing wheel
Bevel/rimless polishing wheel
Chamfering (facetting) wheel (according to machine)
> Automatic clamping pressure
>
Automatic edging pressure adjusted according to substance to be edged
> Lens grooving in single or double width, i.e. L= 0,6 mm (Nylon thread) or L= 1 mm
>
Drilling wide choice of holes :
open
closed
safetysinking
notches
oblongs
> Drilling at variable angles :
parallel to the lens clamping shaft and lens holder shaft
perpendicular to the front face
perpendicular to the rear face
>
Drilling-grooving function
> Safety-bevelling of front and/or rear faces of the lens
>
Connection for pump if operating in closed water circuit
> Edging diametre
< or = 80 mm
rimless (without safety-bevel) = 17.75 mm
bevel (without safety-bevel) = 19.5 mm
facette >= 20,2 + 2 x facette (chamfer) height (according to machine)
grooving (without safety-bevel) = 17.3 mm + depth of the groove x2 (18.5 mm as standard)
safety-bevel rimless/groove = 21.3 mm
safety-bevel = 22.9 mm
>
Automatic cleaning of the lens fixing system and of the edging station
> Edging statistics
>
Personalised machine configuration
> Network connection
>
Option to extract emitted air and dust