Weco Edge 550 Manual Download Page 1 | Manualshive

Page: 1 / 221

Weco Edge 550 Manual Download Page 1

Dear Customer,

You have purchased an Edge 580 - Edge 550 edger and all the team at Weco would like to thank you for this
mark of your confidence.

The Edge 550 is a laboratory machine designed for opticians and is used for edging spectacle lenses.
Connected to an external server, the edger receives data relating to the assembly (shape).

We advise you to read this manual carefully and keep it near the machine in order to be able to refer to it
easily.

The information contained in this manual does not form a contract and can be modified without notice. This
document has been prepared with great care, but some unintentional errors or omissions may occur,
although every effort has been made to avoid them. Weco cannot, in any circumstances, be held responsible
for any possible operating defects that might result from such errors or omissions.

WECO DOES NOT GUARANTEE THE PERFORMANCE OF THE E

DGE

580 - E

DGE

550 IF THE

INSTRUCTIONS IN THIS DOCUMENT ARE NOT RESPECT

D

1
2
3
...
»

Summary of Contents for Edge 550






























































































































































































































Reviews:

No comments