WECO 5K3-XP-EMEA
76
3.6
Serial Battery Wiring Connections
POWER CABLE CONNECTIONS MUST BE MADE IN STRICT ACCORDANCE WITH THE
INSTRUCTIONS IN THIS MANUAL. INCORRECT POWER CONNECTIONS CAN DAMAGE THE
BATTERY AND CAUSE INJURIES OR SERIOUS DANGER AND DAMAGES
Attention
: Screws, Cables and Bus Bar POWER CONNECTIONS must be installed with due
diligence, and the tightening of the connection terminal must be to 14Nm (10.33 ft lb). Each
terminal should be inspected, and its torque checked every three months.
Attention:
All drawings are for reference only, always refer to the physical product as the
standard. If the manual does not match the physical product, stop all actions, remove any
connections, store the batteries in a safe place and call your WeCo technical representative for
assistance
Attention:
For power cable connection for high current connection diagram, please refer to
the specific section. Charging current limitation is mandatory as per this instruction manual.
Attention:
Do not use anything other than WeCo supplied power and data cables
.
CAN PORT B
CAN PORT A
CAN PORT B
CAN TO HV BOX
LAST
MODU
LE
POSITIVE TO HV BOX
NEGATIVE TO HV BOX
CAN PORT A
CAN PORT B
CAN PORT A