WebGate HD1600F-PDR Series, User Manual

Page: 18 / 92

17
Connecting a power cord
When power cord is connected, DVR starts booting automatically.
How to turn off DVR while it is operating : press power switch for 5 seconds, and a pop-up window will appear,
then select “YES” to turn off the power. For turn back on the power again, push the Power button.
Connecting an audio
RCA cable to connect audio input/output devices to DVR
Connecting external device
Connecting USB Device
USB port can be used for copy of recorded data and for mouse.
See below table for USB Device specifications.
<Note>
USB stick needs to be FAT32 formatted.
DVR may not recognize USB Flash memories that require additional program on MS Windows.
Connecting eSATA Device
If external eSATA storage is used, it can be connected to a rear eSATA port. Additional power for eSATA device
will be required as DVR doesn’t supply power.
.
<Note>
1. Check compatibility of eSATA with DVR as not all eSATA are compatible with DVR.
2. If eSATA is connected to DVR when it is on, it may not be recognized depending on external devices. So
we recommend following the below steps.
1) Turn off DVR.
2) Turn off eSATA then connect it to DVR.
3) Turn on eSATA.
4) Turn on DVR.
Connecting NS04R
Connecting to DVR
(1) Connect NS04R to DVR using Gigabit Ethernet cable.
(2) NS04R’s DVR Port and DVR’s Storage Port must be connected directly.
<Note>
1) Use Gigabit Ethernet Cable(Category-6) for Network cables to connect to DVR. Other cables are not
compatible with Webgate DVR.
2) NS04R and DVR must be connected by cables and normal operation isn’t guaranteed if Hub is used.
* For more information and setup of NS04R, please refer to “NS04R user manual”.
USB specifications Ver 2.0 or later
Usable device USB Stick
Voltage specifications DC 5V / Max. 200mA