WebGate HD1600F-PDR Series, User Manual

Page: 17 / 92

16
Connecting other devices
Basic connections
Connecting a monitor
Check monitor resolution and connect to DVR.

HDMI Port : 1920 x 1080p
<Note>
We strongly recommend using HDMI certified cable when connecting to DVR.
Connecting a Camera
Connect 1080P, 720P, 960H, NTSC/PAL camera using recommended cable.
Recommended cable *
*
Depends on manufacturer and models.
* The transmission distance will be almost doubled in case it is used with WEBGATE’s D1080 Series camera or
DoubleReach™ Converter
<warnings>

Transmission distance will be affected by cable types and installation site environment

Transmission distance of the chosen cable will be various based on reduction rate of 750MHz
(reduction rate of dB/100m < 25dB is recommended)

Foamed or high-foamed trishield cable is recommended.

Impedance 75Ω must be used for coax cable connection and connector work.

Beware of deformation of cable due to high pressure over the cable.

Don’t pull the cable with too much force.

For DVR input/output, cables will be tied at the rear of the rack. If tied too tightly, inside/outside insulator can be
deformed so tie it loosely within cable’s curvature range.
Cable Type HD-SDI transmission
distance *
Use
5C2V about 90M Analog signal
4C-FB(T), 4C-HFB(T), RG59 about 140M High-foamed cable, double or triple
shielded cables are recommended
5C-FB(T), 5C-HFB, L-6CHD, RG6 about 180M HD-SDI cable
5C-HFBT about 200M HD-SDI cable