WebGate eDVR MD800M, Installation Manual

Page: 42 / 67

42
11.2.
Configuring etwork infomraiton of MD800M
The following description is based on Ethernet connection. For more detailed information on the Network
setting page and way of using xDSL, please refer “ eDVR USERS’ GUIDE ”.
(1) Press [MENU] button
(2) Select “System” using the [
◀
/
▶
] buttons and press the [
▷
] button.
(3) Select “Network” using the [▲/▼] buttons and press the [
▷
] button.
(4) Select “IP Addr” using the [▲/▼] and press the [
▷
] button.
(5) Press [EXIT] button after entering IP address in the dialogue box.
(6) Select “Net Mask” using the [▲/▼] buttons and press the [
▷
] button.
(7) Press [EXIT] button after entering Net Mask in the dialogue box.
(8) Select “Gateway” using the[▲/▼] and press the [
▷
] button.
(9) Press [EXIT] button after entering Gateway in the dialogue box.
(10) Select “DNS” using the [▲/▼] buttons and press [
▷
] button.
(11) Press [EXIT] button after entering DNS in the dialogue box.
(12) Press [EXIT] button to exit to montor mode