WebGate eDVR MD800M, Installation Manual

Page: 22 / 67

22
8.2.4. Time Format
(1) Select “Time Format” using the [
◀
/
▶
] or [▲/▼] button and press [
▷
] button..
(2) Two time formats are available; ‘DD/MM/YYYY,’ ‘MM/DD/YYYY’, ‘YYYY/MM/DD’; Select a
value using [▲/▼] buttons and press the [EXIT] button when it is finished. (Factory default is set as
‘MM/DD/YYYY’)
8.2.5. Date
(1) Select “Date” using the [
◀
/
▶
] or the [▲/▼] buttons and press [
▷
]. Select ‘MM’, ‘DD’, ‘YYYY’
using the [
◀
/
▶
] buttons.
(2) Press the [EXIT] button when setting is finished.
8.2.6. Time
(1) Select “Time” using the[
◀
/
▶
] or [▲/▼] buttons and press [
▷
].
(2) Select ‘HH’, ‘MM’ using the [
◀
/
▶
] buttons, and select the value using the [▲/▼] button.
(3) Press the [EXIT] button when setting is finished.
8.2.7. Apply Date/Time
Most setting values are applied automatically, when exiting from the related menu page. But “Date”
& “Time” setting are not applied automatically because they may critically affect the file system of
the recorded HDD. To apply Date/ Time settings confirm with [Apply Date/ Time] buttons.
(1) Select “Apply Date/time” using the [
◀
/
▶
] or [▲/▼] buttongs and press [
▷
]. A warning message
will be appeared will be appeared as below;
(2) Select “OK” using [
◀
/
▶
] or [▲/▼] buttons and press [ENTER] button. To cancel, press the [EXIT]
button.