28
<ote>
1.
Configuration a sensor is to set On/Off usage and type.
2.
Please refer to “Alarm Rec” for saving and “Alarm Act” for relay-out on the
“eDVR User’s Guide”
9.2.
Connecting & configuring relay out
9.2.1.
Specifications
In order to run relay output of eDVR MD800M normally, the following conditions are required.
Spec.
Output Ch.
4Ch relay differential outptus
Output type
Dry Contact
Connecting type
Connect the trimmed wire to terminal block
Rated
Voltage
DC
24V DC, 1.25A, 30W
125V DC, 0.24A, 30W
AC
125V AC, 0.5A, 62.5VA
250V AC, 0.25A, 62.5VA
Summary of Contents for eDVR MD800M
