Chapter 9
Maintenance
32708885 Geset 100
Version: 16.07.13
Page 59 of 77
GB
9. Maintenance
Safety instructions
Hazard from direct or indirect contact with voltage-
conducting parts.
DANGER TO LIFE!
- Before performing any work at the labeling station, disconnect it
from electrical power.
*² Hazard from residual compressed air in the pneumatic com-
ponents.
Connecting lines for power, compressed air and computer and
signal lines can pose a tripping hazard, causing serious injury.
- Before performing any work at the labeling station, disconnect it
from compressed air supply.
Danger to health from the improper use of lubricants and
cleaners.
HEALTH HAZARD!
The instructions in the manufacturer’s current safety data sheets
for the specific lubricants and cleaners that are used must be ob-
served along with the applicable safety and disposal regulations
Repairs and servicing may only be performed by electrician when
the device is turned off (voltage-free) according to UVV 7.0 § 2
Para.3. Jobs that must be performed when the electri-cal power
and compressed air are still on may only be done by trained ex-
perts who are aware of the associated hazards and regulations
(such as AuS).
The machine functions must be continuously monitored.
Unusual noise or movements (such as bucking, hammering, etc.)
are indicative of malfunctions and must be investigated.
The maintenance instructions that are described in this section refer exclusively to
the labeling station without (Alpha-) labeler.
Maintenance works that have to be arranged at the (Alpha-) labelers, are described in de-
taild in separately provided documentation in the chapter maintenance.
Summary of Contents for Geset 100
Page 2: ...Blank page ...
