Granudos 45/100-CPR Touch XL + Touch + S5
Dosing unit
Index: 02
Date modified: 06/06/2019
OI No.: BA SW 003-02 Granudos 45-100 CPR Touch+Touch+S5-Dosiereinheit EN.docx Page 25 of 58
4.3
Mechanical installation
The dosing device is delivered completely pre-assembled with the controller and the dirt filter.
Ensure that there is sufficient clearance for operating and servicing the device!
4.3.1
Installation of the GRANUDOS 45/100 dosing system
Place and align the GRANUDOS dosing system on a suitable, level foundation in the
engineering room.
Ensure that there is sufficient clearance for operating and servicing the device.
ATTENTION!
The GRANUDOS 45/100 must be attached to the floor using the 3
screws included in the delivery!
Installation materials
Spare part bag with manometer, gaskets,
membranes
Maintenance set for dosing motor
2 ball valves d25 with adhesive nipple d25-
3/4“
Options for acid pump
4.3.2
Installation of the buffertank (option) with / without protective tub
Place and align the protective tub on a suitable, level foundation in the engineering room. Place
the empty buffertank in the protective tub and check for secure footing. The buffertank may
only be operated with a suitable protective tub. (protective tub may be supplied by the customer,
if applicable)
Ensure that there is sufficient clearance for operating and servicing the device.
