Page 33 of 59
Appendix D – TAP Response Codes
Following is a table of response codes supported by the
WaveWare v
8
Paging Encoder.
Please note that a
<NAK>
response typically means the message should be resent by the host, and an
<RS>
response
typically means the message should be abandoned by the host.
Response Code
Definition
110 1.8
Paging system supports
TAP Specification v1.8
211 Page(s) Sent Successfully
Paging message(s) successfully delivered.
This message is accompanied by an
<ACK>
510 Invalid character in pager ID
Pager ID field contains illegal characters.
This message is accompanied by an
<RS>
511 Invalid pager ID - not in database
Pager ID was legal and 1 to 4 characters in
length, but didn’t match database lookup.
This message is accompanied by an
<RS>
512 Temporarily cannot deliver. Queue full.
Try later
Paging System input buffer is full. This
message is accompanied by an
<RS>
514 Checksum Error. Exp XXX; Got: YYY
Checksum didn’t match message block. This
message is accompanied by a
<NAK>
Note:
<ACK>, <NAK>, and <RS>
are only representations of the lower order
ASCII
control characters output by the
paging system.
<ACK>
represents
Hex 06
,
<NAK>
represents
Hex 15
, and
<RS>
represents
Hex 1E
.
This Completes the “Tap Response Codes”
