Page 25 of 59
Range Test Setup
In this screen you can use the Default “Test” message or type any message in the “Base Message” Field
(A)
.
See Fig. 23
Fig. 23 (Range Test Setup)
A
: Base Message
= Use Default Message
“Test”
or any Custom message you want.
B
: Pin
= Use the
“Pager ID”
you entered in previous screen or type another Pager ID you want to use.
C
: Cycle Time
= Default is
30 Seconds
but you may enter a different cycle time.
D
: Start / Cancel
= When ready click
“Start”
to begin test. When finished click
“Cancel”
to end the Range Test.
Lookup ID Function
The
“Lookup ID”
Function
(A)
will help you determine whether a
Pager ID
number you want to use is
Valid
or not. If it is
valid, the
“Response:
” will show the Pager Information
(B)
and if the
ID
is
NOT
in the Pager Families Database, it will be
Invalid and the
“Response:”
will show
“Pager ID is Invalid”.
See Fig. 24
Fig. 24 (Lookup ID Function and Response)
This Ends the Programming Guide
