General Descriptions
Seite 8 / 180
1. Installation and Wiring
Do not remove the rubber bush. Due to the possibility that a wire may
be damaged, shorted or may have a ground fault with the edge of the
wiring cover.
……
p.2-1
Be sure to ground the unit. Otherwise, there is a danger of electric shock
and/or fire.
Otherwise, there is a danger of electric shock and/or injury.
……
p.2-5
Only qualified personnel shall carry out wiring work.
Otherwise, there is a danger of electric shock and/or fire.
……
p.2-5
Implement wiring
after
checking that the power supply is off.
Otherwise, there is a danger of electric shock and/or injury.
……
p.2-5
Be sure to implement wiring
after
installing the body.
Otherwise, there is a danger of electric shock and/or injury.
……
p.2-5
"Use 60/75 deg. Cu wire only" or equivalent.
……
p.2-5
"A Class 2 circuit wired with Class 1wire" or equivalent.
……
p.2-5
"Suitable for use on a circuit capable of delivering not more than 5,000
rms symmetrical amperes, 240V maximum". For models with suffix N or
L.
……
p.2-5
"Suitable for use on a circuit capable of delivering not more than 5,000
rms symmetrical amperes, 480V maximum". For models with suffix H.
……
p.2-5
Use suitable circuit breaker listed in this manual for UL’s listing purpose.
Otherwise, there is a danger of fire.
……
p.2-12
WARNING
