Installation and Wiring
Seite 17 / 180
2.1 Installation
Do not remove the rubber bush. Due to the possibility that a wire may be damaged, shorted or may have
a ground fault with the edge of the wiring cover.
Install using non-combustible materials (metal etc.)
It is a fire risk.
Do not install combustible materials nearby.
It is a fire risk.
Do not carry unit by top cover, always carry by supporting base of unit.
There is a risk of falling and injury.
Do not allow substance of cutting waste, sputtering of welding, waste of iron, wire and dust
etc. to come into
contact with the unit.
It is a fire risk.
Make sure the surface the unit is installed onto can support the weight of the unit comfortably.
There is a risk of falling and injury.
Do not install or operate the unit if the unit appears damaged.
There is a risk of injury.
Avoid locations of high temperatures, high humidity, dew condensation, dust, corrosive
gases, explosive gases,
combustible gases, coolant mist and sea damage etc. Install indoors, to avoid direct sunlight
and the unit should be well ventilated
WARNING
! CAUTION
