Watlow RMA PLUS RMAP-AA Series, User Manual

Page: 17 / 75

Version 1.0 PN: 2042-8198
Page 17 of 75 DN: 10-32813
Theory of Operation
Configuration is accomplished by way of comma separated variable (.csv) files located on the native file
system. Based on the model number, configuration and feature availability, various configuration files
will be loaded into RAM. Configuration files are only read on initialization. Therefore, when changes are
made, the device must be reset for changes to take effect.
When the RMA PLUS comes out of reset, it reads the file “nor: \Setup.csv. ” Depending on the model
number, the records in this file give the firmware more details about how to proceed with initialization.
Getting Started
Install USB Drivers (Windows® 7, 10)
See the file RMA PLUS USB Device Driver Installation for details.
Configure Ethernet
1. Connect a Mini-B USB cable to the RMA PLUS and launch Dashboard. The discovered RMA PLUS
should be under the
“ USB Devices ” tree node.
Figure 10 - Dashboard: USB Devices subtree
2. Expand the RMA PLUS to see basic device information.