Version 1.0
PN: 2042-8198
Page 22 of 75
DN: 10-32813
Figure 18 - Dashboard: Ethernet Devices subtree, expanded tree node
Working with Drives
The RMA PLUS provides three drives for user access, each with a dedicated purpose. Drives are
accessed via USB. The default drive state is ejected (stopped). This is to prevent unintentional
suspension of firmware services.
The procedure for accessing drives is as follows:
1.
Connect the Mini-B USB cable to the RMA PLUS. Note that LEDs A, B, C change from green to yellow
indicating that USB is connected and one or more drives may be mounted by the PC.
2.
Open My Computer (Windows key + ‘E’) and look under the “Devices with Removable Storage”
group. Three removable drives are available (shown below as drives E, H and I). Note that the drive
letter and order may vary by computer.
Summary of Contents for RMA PLUS RMAP-AA Series
