Watlow RMA PLUS RMAP-AA Series, User Manual

Page: 68 / 75

Version 1.0 PN: 2042-8198
Page 68 of 75 DN: 10-32813
46 0x2E Decay Time 16 FLOAT RW F -3.40E+38 3.40E+38 3677.436267 Decay Time (µs)
47 0x2F Decay Time 17 FLOAT RW F -3.40E+38 3.40E+38 3773.42605 Decay Time (µs)
48 0x30 Decay Time 18 FLOAT RW F -3.40E+38 3.40E+38 3872.442094 Decay Time (µs)
49 0x31 Decay Time 19 FLOAT RW F -3.40E+38 3.40E+38 3972.498088 Decay Time (µs)
50 0x32 Decay Time 20 FLOAT RW F -3.40E+38 3.40E+38 4075.384281 Decay Time (µs)
51 0x33 Decay Time 21 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
52 0x34 Decay Time 22 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
53 0x35 Decay Time 23 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
54 0x36 Decay Time 24 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
55 0x37 Decay Time 25 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
56 0x38 Decay Time 26 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
57 0x39 Decay Time 27 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
58 0x3A Decay Time 28 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
59 0x3B Decay Time 29 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
60 0x3C Decay Time 30 FLOAT RW F -3.40E+38 3.40E+38 -273.0 Decay Time (µs)
80 0x50 Factory Gain FLOAT R F -3.40E+38 3.40E+38 1.0
81 0x51 Factory Offset FLOAT R F -3.40E+38 3.40E+38 0.0
82 0x52 User Gain FLOAT RW F -3.40E+38 3.40E+38 1.0
83 0x53 User Offset FLOAT RW F -3.40E+38 3.40E+38 0.0
Product Compatibility
•
EZ-ZONE RM (C, E, H, L, S) version 9.0+ (high-speed Watbus)
•
EZ-ZONE RM (A, C, E, H, L, S), PM, RUI, ST, field communication cards (low-speed Watbus)
•
EZ-ZONE RM (F, G, UH, Z)
•
POWERGLIDE ™
Software Compatibility
Software Serial USB Ethernet
Dashboard X X X
EZ-ZONE COMPOSER X X X
EZ-ZONE Configurator X
LabVIEW X X X
Watbus DLL X X X
Firmware Updates
The firmware in the RMA PLUS or any “newer” device connected to high -speed Watbus may be updated
using the stand-alone Watbus Flash Loader utility or Dashboard from Ethernet, USB or serial.
Some supported devices include: EZ-ZONE RM (A2, Z, F, G, UH), POWERGLIDE, etc.
When the flash load is complete, the RMA PLUS will switch to boot code to complete the firmware
update. LED A (solid red) indicates the product is running boot code. LED B (flashing red) indicates the
progress of the current update operation. LEDs C and D will be off. When complete, the new
application will automatically run. Check the version to ensure the update was successful.