manualshive.com logo in svg

Watlow PM PLUS 6, User Manual

Share
Download
Watlow PM PLUS 6 User Manual Download Page 133

Watlow PM PLUS™ 6   

•  133  • 

Chapter 10 Appendix

Operator Interface

•  LCD display
•  Smooth touch keypad
•  Programmable function key

Line Voltage/Power

•  High voltage option: 85 to 264VAC, 47 to 63Hz
•  Low voltage option: 20 to 28VAC, +10/-15%; 50/60Hz, ±5% or 12 to 40VDC
•  Max. power consumption: 10VA

Environment

•  Operating temperature: 0 to 149°F (-18 to 65°C)
•  Storage temperature: -40 to 185°F (-40 to 85°C)
•  Relative humidity: 0 to 90% RH, non-condensing

Agency Approvals

•  cULus

®

 UL

®

/EN/CSA C22.2 No 61010-1 Listed, File E185611

•  CSA C22.2 No. 24, File 158031 (1/32 and 1/16 DIN sizes) all models are approved.
•  IP 67, UL

®

 Type 4X front seal indoor locations

•  cULus

®

 ANSI/ISA 12.12.01-2012, CSA-C22.2 No. 213-1987, Class 1,  

Div. 2, Groups A, B, C and D, Temperature Code T4A,  

File E184390 (optional)

•  FM Class 3545 (limit controls)
•  CE, RoHS by design, W.E.E.E.
•  EtherNet/IP™ and DeviceNet™ ODVA Conformance Tested displays

Summary of Contents for PM PLUS 6








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands