6
A p p l i c a t i o n 6
Wa t l o w M
I N I
C
H E F
2 0 0 0
■
5 5
Application 6
Manual Cook & Hold Oven
One Heat Channel, One Manual Menu
Introduction to Application 6 . . . . . . . . . . . . . . 55
Configuration Mode Quick Reference . . . . . . . . 57
Step 7 Design a Faceplate Overlay . . . . . . . . . . 59
Step 8 Operate the Controller . . . . . . . . . . . . . 60
Application 6 allows the manual setting of a single menu to control a temperature chan-
nel, and cooking time for a manual cook-&-hold oven. This application can include a one
or two step cooking sequence and a hold function.
Overview of Key Steps
1.
Install the M
INI
C
HEF
2000.
2. Wire the controller.
3. Configure the controller.
4. Program the menu.
5. Set the controller security.
6. Set the Real-time Clock.
For instructions on Steps 1, 2, 3, 4, 5 and 6, see the Hardware & Software Setup Guide.
7. Design, manufacture and apply faceplate overlay for end-users. (For a suggested
design to suit this application, see this section. For overlay dimensions and guide-
lines, see the Hardware & Software Setup Guide.)
8. Operate the controller. (See this application guide.)