Application 1
Automatic Cook-&-Hold
Oven with Meat Probe
Option
One Heat Channel, Six Menus
Introduction to Application 1 . . . . . . . . . . . . . . . 1
Configuration Mode Quick Reference . . . . . . . . . 3
Program Mode Quick Reference . . . . . . . . . . . . 4
Step 7 Design a Faceplate Overlay . . . . . . . . . . . 5
Step 8 Operate the Controller . . . . . . . . . . . . . . 6
Application 1 allows you to program as many as six menu keys to control one tempera-
ture channel, a fan and cooking time for an automatic cook-&-hold oven with or without
a meat probe.
Overview of Key Steps
1.
Install the M
INI
C
HEF
2000.
2. Wire the controller.
3. Configure the controller.
4. Program the menus.
5. Set the controller security.
6. Set the Real-time Clock.
For instructions on Steps 1, 2, 3, 4, 5 and 6, see the Hardware & Software Setup Guide.
7. Design, manufacture and apply faceplate overlay for end-users. (For a suggested
design to suit this application, see this section. For overlay dimensions and guide-
lines, see the Hardware & Software Setup Guide.)
8. Operate the controller. (See this application guide.)
1