A p p l i c a t i o n 3
Wa t l o w M
I N I
C
H E F
2 0 0 0
■
3 1
2.
Press the key for the menu you want to run.
The menu key indicator will light up. Time will count down on the display.
The unit will run the following two-step cooking sequence:
Countdown time is displayed. It is the total of the programmed Time 1 plus Time 2.
Set point 1 and Fan 1 will run until Time 1 expires.
Set point 2 and Fan 2 will run until Time 2 expires. You will not see the switch-over
from Time 1 to Time 2.
3.
Once the entire cooking sequence is complete, the unit will switch to the Hold
sequence. The display will alternate slowly between Hold and count up time.
If the Hold time parameter
[Htine]
has been set to 0, the unit will count up time
indefinitely. The hold sequence will end when you cancel the current menu or acti-
vate another menu.
If Hold time
[Htine]
is greater than 0, the unit will run the hold sequence until
the hold time expires. It will then switch to the sequence described in 4.
4.
When the cook-&-hold cycle is finished, one of the following will happen, depending
on the way the controller was programmed at
[Etype]
/
[sound]
.
With Sound set to 0: The controller automatically switches to idle, in which the con-
troller does not maintain temperature and does not run time.
[`idle]
or current
time will appear on the display. The menu key indicator light will be off.
With Sound set to 1, 2, or 3:
[``end]
will appear on the display and an audible tone
will be emitted. The menu key indicator light will flash rapidly. You can acknowl-
edge and silence the tone by pressing the active menu key or it will time out in 1 to
20 seconds and go into idle.
With Sound set to 4 or 5:
[``end]
will appear on the display and the menu key
indicator light will flash rapidly. You must acknowledge the audible signal by press-
ing the active menu key. Once acknowledged the tone is silenced and the controller
goes into idle.
5.
Once the controller goes into idle, the menu key indicator light and the heat outputs
will switch off. The controller will not regulate to any temperature.
6.
To repeat cooking, repeat steps 1 through 3 or 4.
Pause a Menu
While cooking, you can pause cooking time by pressing the active menu key once. The
menu key indicator light will flash rapidly.
[PAUSE]
will appear on the display.
Countdown time will resume when you press the active menu key again.
H
M
INI
C
HEF
2000
[`Ho1d]] [``!¢4]
Edit
Accept
Back-Up
Exit
A
B
D
E
C
F
G
H
M
INI
C
HEF
2000
[`Ho1d]] [``!¢4]
Edit
Accept
Back-Up
Exit
A
B
D
E
C
F
G