A p p l i c a t i o n 2
Wa t l o w M
I N I
C
H E F
2 0 0 0
■
1 1
Application 2
Automatic Cook-&-Hold
Oven with Meat Probe
Option
One Heat Channel, 17 Menus
Introduction to Application 2 . . . . . . . . . . . . . . 11
Configuration Mode Quick Reference . . . . . . . . 13
Program Mode Quick Reference . . . . . . . . . . . . 14
Step 7 Design a Faceplate Overlay . . . . . . . . . . 15
Step 8 Operate the Controller . . . . . . . . . . . . . 16
Application 2 allows you to program as many as 17 menus to control one temperature
channel, a fan and cooking time for an automatic cook-&-hold oven with or without a
meat probe. The application includes a two-step cooking sequence and a hold function.
Overview of Key Steps
1.
Install the M
INI
C
HEF
2000.
2. Wire the controller.
3. Configure the controller.
4. Program the menus.
5. Set the controller security.
6. Set the Real-time Clock.
For instructions on Steps 1, 2, 3, 4, 5 and 6, see the Hardware & Software Setup Guide.
7. Design, manufacture and apply faceplate overlay for end-users. (For a suggested
design to suit this application, see this section. For overlay dimensions and guide-
lines, see the Hardware & Software Setup Guide.)
8. Operate the controller. (See this application guide.)
2