A p p l i c a t i o n 5
Wa t l o w M
I N I
C
H E F
2 0 0 0
■
4 5
Configuration Mode Quick Reference
These are the functions, parameters and values included in the Configuration Mode for
this application. You must select Application 5 to access them. For directions, see the
Hardware & Software Setup Guide. The Appendix of that guide includes an explanation
of all parameters and values.
Function
Parameter
Value
Your Settings
[Etype]
Equipment-Type
[appl`]
Application Number
1 - 28
5
[a_Loc]
Application Number
Yes, No
Security Lock
[T`OUT]
Timer Output 4
Yes, No
[StEPS]
Number of Cooking Steps
1, 2
[SEtUP]
Setup
[`Ç_Ï`]
Temperature Display Format
ºC or ºF
[time]
Time Display Format
MMM:SS, HH:MM, H:MM:SS
[Chirp]
Key Chirp
On, Off
[tc```]
Thermocouple Type
J, K (shown as
[````H]
), E
[rtd``]
RTD Curve
DIN, JIS
[tconp]
Temperature Compensation
On, Off
[Ofst1]
Temperature Offset,Channel 1 -99 to 99ºF (-55 to 55ºC)
[Ofst2]
Temperature Offset,Channel 2 -99 to 99ºF (-55 to 55ºC)
[tr`lo]
Temperature Range Low
0ºF (-18º C) for RTD inputs
32ºF (0ºC) for tc inputs to
[tr`Hi]
[tr`Hi]
Temperature Range High
[tr`lo]
to 1200°F (649°C)
[ready]
Preheat Ready Feature
Yes, No
[rband]
Ready Band
1 to 1200ºF (649ºC)
[Cloc`]
Real Time Clock
Yes, No
[plOSS]
Menu Resume
Yes, No
[al``1]
Alarm for Channel 1
None, Dev, Proc, Both
[aL`P1]
Absolute Process Alarm 1
10 to 1200ºF (38 to 649ºC)
[aLdL1]
Low Deviation Alarm 1
-999 to 0ºF (-555 to 0ºC)
[aLdH1]
High Deviation Alarm 1
0 to 999ºF (0 to 555ºC)
[AL``2]
Alarm for Channel 2
None, Dev, Proc, Both
[AL`P2]
Absolute Process Alarm 2
100 to 1200ºF (38 to 649ºC)
[aLdL2]
Low Deviation Alarm 2
-999 to 0ºF (-555 to 0ºC)
[aLdH2]
High Deviation Alarm 2
0 to 999ºF (0 to 555ºC)
[tHErl]
Thermal
[tyPE`]
Type of Temperature Control
Pid, On-Off
[HYSt1]
Hysteresis 1
1 to 99ºF (1 to 55ºC)
[Pid`U]
PID Units
SI, US
[tune1]
Auto-tuning 1
On, Off
[ProP1]
Proportional Band 1
1 to 999ºF (1 to 555ºC)
[rSEt1]
Reset (integral) Gain 1
0.00 to 9.99 repeats/minute
[int`1]
Integral Gain 1
0.00 to 99.99 minutes/repeat
[rAtE1]
Rate (derivative) Gain 1
0.00 to 9.99 minutes
[dEr`1]
Derivative Gain 1
0.00 to 9.99 minutes
[CYcL1]
PID Cycle Time 1
1 to 60 seconds
[[`diag]
WatHelp
Used for equipment troubleshooting and testing. Not used when programming. See the Hardware
Diagnostics
& Software Setup Guide.