2 8
■
Wa t l o w M
I N I
C
H E F
2 0 0 0
A p p l i c a t i o n 3
Step 8 Operate the Controller
Summary of Key Functions in Operation Mode
Key
Function
A
Menu 1
B
Menu 2
C
Menu 3
D
Menu 4
E
Menu 5
F
Menu 6
Startup
Apply power to the oven.
[`iDle]
will appear on the display.
If the Real-time Clock option is installed and
[SetUp]
/
[time]
is programmed, the
time of day will appear on the display.
Preheat
If the
[ready]
parameter under the
[SetUp]
function in the Configuration Mode is set
to
[``yes]
, the controller will detect temperatures and preheat to operating tempera-
ture (above relative set point minus the ready band).
•
Press the key for the menu you want to run. Each key selects a different menu. You
can select from up to six menus that control temperature and cooking time. Only
one menu may be run at a time.
Note: The controller will not respond if you select an invalid menu (the sum of Time 1 and Time 2 is 0).
The menu you have chosen becomes the current menu for controller operation. Until the
menu is completed or canceled, the indicator above the menu key will light up (flashing
or steady) to indicate the active menu.
• If the oven is not at operating temperature, it will preheat. Meanwhile:
The word
[Pre-`] [`Heat]
will appear on the display for a few moments. The menu
key indicator light will flash slowly. The temperature of Channel 1 will be displayed
until the operating temperature is reached.
(The Heat output indicator light — G, just below the display — will light up whenever
the controller is calling for heat.)
A
B
D
E
C
F
G
H
M
INI
C
HEF
2000
[`idle]
Edit
Accept
Back-Up
Exit
SLOW
FLASH
AT OPERATING TEMPERATURE
(PREHEAT CONDITION MET)
RAPID
FLASH
B
D
E
C
F
M
INI
C
HEF
2000
[100f`]
Edit
Accept
Back-Up
Exit
B
D
E
C
F
M
INI
C
HEF
2000
[ready]
Edit
Accept
Back-Up
Exit
G
H
G
H
A
A
[pre-`] [`Heat]