5 - Error Conditions, Problems and Solutions - Message List
Watkiss PowerSquare™224 User Manual
81
SIDE TRIM - no comms Check that the mains power input
cable and the communications
cable are connected.
Use the side-trimmer mains ON/
OFF switch. Turn the side-trimmer
OFF, wait at least 5 seconds and
then turn the side-trimmer ON.
If the problem continues, then call
your service engineer.
See “The Side-
Trimmer” on
page 7.
STACKER FULL
The stacker is full. Unload the
books from the stacker.
STACKER - No comms
Check that the stacker power input
is connected.
Check that the stacker mains ON/
OFF switch is ON. If the problem
continues, then call your service
engineer.
Stitch axis moving
The stitch axis is moving. This
message clears when the adjust-
ment is complete.
If the message does not clear,
touch
ADVANCED
>
RE-REF
.
Stitch length will change
soon
The stitch length cannot adjust at
the moment. The stitch leg length
will adjust after the next book.
STITCH - No comms
Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON. If the problem
continues, then call your service
engineer.
Stitch position adjusting
The stitch position is adjusting.
This message clears when the
adjustment is complete.
If the message does not clear,
touch
ADVANCED
>
RE-REF
.
STITCH TIMEOUT
Press STOP . Open the folder
cover, remove the paper, close the
folder cover.
Message
Information
Reference
Summary of Contents for PowerSquare 224
