Watkiss PowerSquare 224, User Manual

Page: 16 / 134

2 - How to Run the PowerSquare - Enter the Job Settings
12
Watkiss PowerSquare™224 User Manual
Procedure for a New Job
Step Action Information
1
Touch
BASIC .
2 Enter the paper size. Touch
PAPER SIZE
. Enter the dimensions of
the paper.
The job setting is easier if you first select a
preset paper size, then adjust the settings as
necessary.
Touch
PAPER SIZE
>
PRESETS
>
A3
or
A4
.
(USA: 11x17, 8.5x11 or 8.5x14)
3 Enter the page direction. Touch
PAGE DIRECTION > LANDSCAPE
or
PORTRAIT
.
If the
PAGE DIRECTION
option is not available,
the
PAGE DIRECTION
cannot be changed.
4 Enter the page rotation set-
ting. For A4 paper size, the normal setting for
ROTATE
is
ON
. Rotation lets the printer oper-
ate at optimum speed.
Touch
ROTATE
to turn the sheet rotation
ON
or
OFF
. Always select the page direction before
you change the rotate setting.
5 Enter the sheet thickness
or
Touch
SET THICKNESS.
Set
AUTO
to
ON
. Use
‘+’
or
‘ - ’
to enter the
SHEET THICKNESS
.
Enter the set thickness.
See “Set Thickness and
Sheet Thickness” on
page 10.
Touch
SET THICKNESS.
Set
AUTO
to
OFF
.
Use
‘+’
or
‘ - ’
to enter the
SET THICKNESS
.
6 Enter the number of
stitches. Touch
STITCHES
and enter the number of
stitches. If needed, the stitch pitch can be
changed. See “STITCH PITCH” on page 20.
Xerox Nuvera users: Select the correct profile
on the printer.
7 Enter the spine form set-
ting. The spine form setting is automatic, accord-
ing to the
SET THICKNESS
setting. If needed,
the setting can be changed. See “FORM” on
page 21
8 Enter the trim setting. The trim setting is automatic, according to the
PAGE SIZE
and
SET THICKNESS
settings. To
change the setting, touch
TRIM
. See “TRIM”
on page 21