Watkiss PowerSquare 224, User Manual

Page: 123 / 134

6 - Maintenance - Install New Stitch-wire
Watkiss PowerSquare™224 User Manual
119
Close the PowerSquare
Feed the Stitch-wire
Step Action Information
1 Close the stitch wire cabinet.
2 Lower the PowerSquare main
deck.
3 Lower the clincher frame. See “Lower the Clincher Frame”
on page 35.
4 Close the folder cover.
5 Close the connecting bridge cover.
Step Action Information
1
Touch START
2 Set the number of stitches to 6. Touch
BASIC
>
STITCHES
.
3 Hand-feed or print an A4 or larger
size test job. Enter the correct settings on the
touch screen, according to the size
and thickness of the job.
The stitch-wire loads automati-
cally during the stitch head cycle.
4 Check the stitch-wire is loaded. Check that a stitch is made.
If needed, repeat the previous
step.
If a stitch is still not made, repeat
the procedure “Install the Stitch-
wire into the Stitch Head” on
page 118.
5 Reset the number of stitches on
the touch screen.