Watkiss PowerSquare 224, User Manual

Page: 82 / 134

5 - Error Conditions, Problems and Solutions - Message List
78
Watkiss PowerSquare™224 User Manual
JAM IN SIDE TRIM Open and then close the top cover
of the side-trimmer.
Then, if necessary, open the top
cover of the side-trimmer and
check for paper trimmings or
obstructions. Close the top cover
of the side-trimmer.
If the message still does not clear,
use the side-trimmer mains ON/
OFF switch. Turn the side-trimmer
OFF, wait at least 5 seconds and
then turn the side-trimmer ON.
If the problem continues, then call
your service engineer.
JAM IN STACKER
AREA There is a paper jam at the outfeed
of the machine. Remove the
jammed books and continue.
JAM IN STITCHER
AREA There is a paper jam in the stitch
area. Open the folder cover,
remove the paper jam and con-
tinue. See “Jam in the
Stitch Area” on
page 86.
JAM IN STITCH HEAD There is a jam in the stitch head. See “Clear a Stitch
Head Jam” on
page 94.
JAM IN TRIMMER There is a book jammed in the
trimmer. Clear the jam and con-
tinue. See “Jam in the
Trim Area” on
page 89.
MAIN CONTROL - No
comms Use the mains ON/OFF switch.
Turn the machine OFF, then turn
the machine ON. If the problem
continues, then call your service
engineer.
MANUALLY PARK
SHUTTLE The shuttle is not parked correctly.
Open the folder cover and move
the shuttle to the park position.
Close the folder cover. The shuttle
will reset. When the message list
is clear, continue operation. See “Manually
park the Shuttle”
on page 100.
MISSING STITCHES The machine has detected missed
stitches.
Check if the stitch-wire is jammed
or if the stitch-wire spool is empty.
See “Clear a
Stitch-wire Jam”
on page 92 or see
“Install New Stitch-
wire” on page 116.
Message Information Reference