Watkiss PowerSquare 224, User Manual

Page: 120 / 134

6 - Maintenance - Install New Stitch-wire
Watkiss PowerSquare™224 User Manual
Install New Stitch-wire
Introduction
Only use stitch-wire that is approved by your supplier. Stitch-wire that is not
approved by your supplier can cause bad performance and cancels the war-
ranty.
Stitch-wire Description
• PSQ, Stitch Wire PowerBind 0.6mm 15kg
• Part number 812-038
Before You Begin
Lift the PowerSquare main deck. See “Lift the PowerSquare Main Deck” on
page 25.
Remove the Stitch-wire from the Stitch Head
Stitch-wire Guide Block
Stitch-wire
Felt wire-cleaning pads
FIGURE 67. Stitch-wire Guide Block
Step Action Information
1 Cut the stitch-wire to the right of
the stitch-wire guide block.
2 Pull the stitch-wire from the stitch-
wire guide block.
3 Fit a new stitch-wire spool. See “Fit a New Stitch-wire Spool”
on page 117.
Cut here
116