You can access these additional functions by right-clicking anywhere in the sample manager
control panel.
Table 3–5: Additional functions in the sample manager control panel
Control panel function
Description
Prime
Displays the Prime dialog box.
Wash needle
Displays the Wash Needle dialog box.
Launch Console
Launches the console software.
Reset SM
Resets the sample manager following an error condition.
Help
Displays the console online Help.
3.5.3 Solvent manager control panel
The control panel of the quaternary solvent manager (QSM) displays system pressure, total flow
rate, and solvent composition.
You can edit these parameters when the system is idle by clicking the underlined value. You
cannot edit solvent manager parameters while the system is running samples.
Figure 3–3: QSM control panel
Flow LED – Mirrors the flow status LED on the solvent manager's front panel, unless
communications are interrupted.
Flow rate – Displays the flow rate of solvent through all lines of the solvent manager.
Stop flow – When clicked, immediately stops all flow from the solvent manager.
Solvent composition – Displays the percentage of solvent to be drawn from solvent lines A
through D. Composition values range from 0.0 to 100.0%.
System pressure – Displays system pressure, in kPa, bar, or psi. You can specify pressure
units in the console software.
Status – Displays the status of the current operation.
August 8, 2016, 715005049 Rev. C
Page 53
